Earalas airson inneal stàlaidh is deuchainn inneal spreadhaidh seòrsa dubhanï ïˆä¸ € ï¼ ‰

Tha aninneal spreadhaidh seòrsa dubhansa chumantas tha coltas nas motha air, agus tha am pròiseas stàlaidh an ìre mhath nas toinnte na tha uidheamachd beag. Is e stàladh ceart agus inneal deuchainn an dòigh as fheàrr air dèanamh cinnteach à obrachadh àbhaisteach an uidheamachd nas fhaide air adhart. A thaobh obair tòiseachaidh neo-sgileil, feumaidh luchd-cleachdaidh stiùireadh teann luchd-obrach buntainneach a leantainn no sùil a thoirt air an stiùireadh. Faodaidh gnìomhachd gun chead milleadh do-sheachanta a dhèanamh air aninneal spreadhaidh peilear dubhan. Tha anshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. Tha aninneal spreadhaidh seòrsa dubhan is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. Tha anprecautions for the installation and debugging of the relevant components are introduced below.
1. Inneal sèididh losgadh:
Tha anshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Inneal-togail agus sgriubha:
Dèan deuchainn gun luchdachadh an toiseach gus faighinn a-mach a bheil am bucaid togail agus na lannan snìomhach a ’ruith anns an t-slighe cheart, an uairsin teann crios an inneal-togail gu ìre meadhanach de theannachadh gus gluasad a sheachnadh, agus an uairsin dèan deuchainn luchdan gus sgrùdadh an comas obrachaidh agus giùlain, ge bith a bheil neònach sam bith Fuaim is crathadh, thoir sùil air agus thoir air falbh cnapan-starra.
3. Dealaiche gainmhich-pill:
Dèan sgrùdadh an toiseach a bheil gluasad an reithe sùbailte, agus an uairsin dèan sgrùdadh air suidheachadh ceart a ’phlàta dealachaidh, an uairsin nuair a thèid an inneal-togail a luchdachadh agus a dhì-bhugachadh, tha sruthadh leantainneach de dhealbhan stàilinn ann, agus dèan cinnteach a bheil na buillean stàilinn a’ sruthadh a-mach agus a ’tuiteam. nuair a thèid a ’chute a leigeil ma sgaoil